\ \
Hello, everyone. I’m not bad. I’m not bad. Teachers are not bad. Teachers have already said that R7 will be changed to water-cooling solution. For various reasons, the R7-to-water-cooling general solution was officially launched today. First of all, thanks to the AMD Radeon VII Ckk for the AMD original It took more than a week for the factory’s public version of Radeon VII graphics card to finally complete the solution.
\ \
After the modification is completed:
\ \
Can reduce temperature, reduce noise, improve performance, improve stability
\ \
Reduce graphics card damage caused by high temperature and extend graphics card service life
\ \
This program has been developed and updated by the same teacher and has matured
\ \
Compare to othersAMD Radeon VII（R7）Series change to water cooling scheme
\ Cost: the advantage is huge, the lowest at present The cost of changing to a new 120 water cooling system is less than 300
\ \
Compare the Arctic Wolf 240 integrated water cooling to 1580 yuan. The plan is changed to 240 water cooling and the cost does not exceed 400. The modified 360 water cooling takes the new Patriot 360 water cooling as an example. The cost of 566+61 does not exceed 600.
\ \
Safety: At present, the safety factor is the highest, because only the original radiator and the upper half of the shell are removed without moving the middle frame and the back panel. After the test of the teacher, all have passed the safety indicators.
\ \
Modification ease of use: Because only the original radiator and the upper shell are removed, the installation method is similar to the water cooling method on the CPU. There is no difference. The teacher personally recorded a video of the installation tutorial.
\ \
Cooling effect: can conduct three heat conduction heat dissipation, select a large-volume water cooling head to heat the core video memory and power supply.
\ \
At present, taking the 360 ??water cooling as an example, the indoor temperature is 10 degrees, and the standby temperature is 12-16 degrees.（In summer, the indoor baking machine is around 55 degrees at around 20-30 degrees.）The junction temperature does not exceed 90 degrees. The junction temperature after the 4K baking machine is around 85.
\ \
The following figure shows the peak temperature of the 4K baking machine after changing to water cooling under the default settings（Room temperature 28-30 degrees）
\ \
\ \
This program applies to the whole seriesAMD Radeon VII（R7）Graphics card:
\ AMD public version
\ \
Brand: all AMD public versionAMD Radeon VII（R7）Such as XFX, Sapphire, MSI, Asus, Yeston, Dylan, Pan Lei, Gigabyte, etc.
\ \
\ \
R7 graphics card has no turbo fan. If there is no fan under the chassis, it is recommended to install a graphics card companion to assist in the heat dissipation of the power supply. It is recommended that at least two fans blow towards the motherboard of the graphics card frame
\ \
No difference, the teacher’s graphics card changed to the water-cooled general solution of AMD’s original Radeon VII（R7 Thunder Dragon 7） Program main link
\ \
Video installation tutorial:
\ \
No difference, the teacher’s graphics card changed to the water-cooled general solution of AMD’s original Radeon VII（R7 Thunder Dragon 7）Install Jinhetian 360 integrated water cooling as an example, the latest bracket update spring graphics card conversion line tutorial teaching live recording
\ \
Link: https://www.bilibili.com/video/av55444637
\ \
Viewing method: computer users please copy the link directly and open the browser to watch, mobile phone users please enter av plus the last few digits in the search barav55444637Then click search
\ \
AMD Radeon VII（R7）High-end technology group group number: 756191369
\ \
Modification is risky, please watch the tutorial carefully before doing it
\ \
Graphic introduction of a full set of accessories for the Patriot dedicated graphics card water cooling（ Customized universal buckle+Custom laser cut copper gasket）
\ \
\ \
\ \
There are two types of screws for this fastener. Please measure the thickness of the water block and select the appropriate screw length.
\ \
Fixed buckle/component 30mm screw version Recommended split water block such as split copper water block
\ \
Fixing fastener/component 55mm screw version. Thicker split water block is recommended, such as split copper water block or integrated water block.
\ \
Fixed buckle/component 65mm screw version is recommended for thicker integrated water block
\ \
method:
\ \
Use a ruler to measure the thickness of the water block you want to use plus 15-17 mm is the length of the screw you want to choose
\ \
\ \
Laser cut copper（Copper gasket） :
\ \
The function is to elevate the core and the video memory so that the water block can receive the heat of the core video memory to export the heat of the core and the video memory and the middle frame to share the core and video memory pressure to prevent Xiaobai from overpowering the core and video memory by the way, let the water cool The head touches the middle frame to export the heat generated by the power supply（Solve most of the power supply heat） Lower the power supply temperature-the newly upgraded 4 sides are more accurate (for example, the 4 sides of the water block are smaller than 52*52 or the water block can directly press the core and the video memory without adding copper gaskets)
\ \
After the surface is polished, there is a film on the copper sheet at the time of delivery. Confirm that you want to install it and then tear it up, otherwise it will be easy to oxidize. It is recommended to wipe the copper surface with a paper towel or a dust-free cloth after tearing it off and then install it.
\ \
The red copper is generally called red copper because of its rose red color and purple after the oxide film is formed on the surface. It is copper with a certain amount of oxygen, so it is also called oxygen-containing copper. The thermal conductivity is 386.4w/(m.k)
\ \
-Taken from Baidu Encyclopedia
\ \
Customized universal water cooling head fixing components:
\ \
After the research and development of the same teacher
\ \
Suitable for most water cooling heads in the world（Whether it is split water cooling or integrated water cooling heads are supported）
\ \
The buckle is made of stainless steel plate through laser cutting
\ \
Special:
\ \
The spring is made of stainless steel, customized double flat head 6 turns, wire diameter 0.8 mm, full elasticity, rebound without deformation-new upgrade
\ \
The screw material is stainless steel. Customized half-thread screws. Energy efficiency reduces the wear and tear on the motherboard. No rust. Long time makes more reliable
\ \
The nut is made of copper, galvanized, and hand-tightened to reduce the overall weight
\ \
The gasket is made of harmless nylon white, semi-permeable, beautiful and durable, reducing single-point pressure and wear on the motherboard
\ \
\ \
It is known that the integrated water cooling suitable for this modification scheme has
\ \
patriot（aigo）Ice Soul T120 T240 T360RGB version all-in-one water cooling radiator
\ \
patriot（aigo）Ice Tower T120 T240 Aurora Edition Integrated Water Cooling Radiator
\ \
patriot（aigo）Ice Tower V120 V240 V360 Rainbow Edition Integrated Water Cooling Radiator
\ \
Jinhetian ice 120 240 360 integrated water cooling
\ \
and many more
\ \
As long as the following water block requirements are met
\ \
Requirements when choosing integrated water cooling or split water cooling head
\ \
Flat head, small size, 4 sides not longer than the graphics card hole pitch 64 mm
\ \
It is recommended that the length and width do not exceed 60 mm and the height does not exceed 55 mm.
\ \
About the choice of water cooling row
\ \
Of course the bigger the better
\ \
AMD Radeon VII（R7）Compared with the previous generation VEGA total card, the power consumption is higher, and the stronger performance means more heat generation.
\ \
Then for long-term stability, at least 240 water cooling is recommended for the water-cooled BIOS, and 360 water cooling is recommended for extreme play.
\ \
Whether to play RGB sound and light synchronization depends on the water cooling you choose
\ \
Note: The above water-cooled models are all sold in our shop. Welcome to shop and buy
\ \
Thermal grease selection
\ becauseAMD Radeon VII（R7）The chip area is relatively large and the heat generation is relatively high. There are certain requirements for replacing the thermal grease when refitting（Coarse particles can also reduce errors and increase success rate）
\ \
Recommended thermal grease: medium or coarse particles such as Shin-Etsu 7762, Shin-Etsu 7921
\ \
Thermal grease is not recommended: too delicate such as MX4
\ \
AMD Radeon VII（R7）After the modification is completed, the general scheme is installed with Jinhetian integrated water cooling as an example. Schematic picture
\ \
